Publications

Payami Golhin, A., A. S. Sole, and A. Strandlie (2023) BRDF representation in response to the build orientation in 3D-printed digital materials. Journal of Manufacturing Processes 104 p. 218-229. Doi: 10.1016/j.jmapro.2023.09.016

Payami Golhin, A., and A. Strandlie (2023) Optical properties of tilted surfaces in material jetting. Optics & Laser Technology 168: 109992. Doi: 10.1016/j.optlastec.2023.109992

Payami Golhin, A. A. S. Sole, and A. Strandlie (2023) Evaluation of surface roughness and periodical layers in material jetting, euspen’s 23rd International Conference & Exhibition, Copenhagen, DK, 12-16 June 2023. Doi: 10.5281/zenodo.8351945

Abu Rmaileh, L., A. Brunton (2023) Meso-Facets for Goniochromatic 3D Printing. ACM Trans. Graph., Vol. 42, No. 4, Article 1.

Kadyrova A, Pedersen M, Westland S, Weijkamp C. (2022) Effect of various ink types on naturalness perception of 2.5 D prints. Journal of Print and Media Technology Research. 2022;11(4):283-90.

Trujillo-Vazquez, A., K. Rodriguez, T. Weyrich (2022) Tactile prints in colour: Studying the Visual Appearance of 2.5D Prints for Heritage Recreations. EG Workshop on Graphics And Cultural Heritage (GCH) Short Papers, 4 pages, Delft, The Netherlands, 28–30 September 2022

Abedini, F., A. Trujillo, S. Gooran, S. Klein (2023). Effect of halftones on printing iridescent colors. Electronic Imaging. 35. 206-1. DOI: 10.2352/EI.2023.35.15.COLOR-206.

Payami Golhin, A., A. Strandlie (2023) Appearance evaluation of digital materials in material jetting. Optics and lasers in engineering, Vol. 168. p. 107632. Doi: 10.1016/j.optlaseng.2023.107632

Payami Golhin, A., R. Tonello, J. R. Frisvad, S. Grammatikos, A. Strandlie (2023) Surface roughness of as-printed polymers: a comprehensive review. The International Journal of Advanced Manufacturing Technology 2023. Doi: 10.1007/s00170-023-11566-z

Payami Golhin, A. C. Srivastava, A. Strandlie, A. Sole, S. Grammatikos (2023). Effects of accelerated aging on the appearance and mechanical performance of materials jetting products. Materials & design. vol. 228.

Habib, T., P. Green, P. Nussbaum (2022) A weighted goodness-of-fit metric for comparison of spectra, in Sensing Colour, Proceedings of the International Colour Association (AIC) Conference 2022, International Colour Association, 2022.

Shao, M., D. Huson, J. Clark (2022) Simulation of laparoscopic ultrasound imaging and suturing of the bile duct using silicone, Proc. SPIE 12034, Medical Imaging 2022: Image-Guided Procedures, Robotic Interventions, and Modeling, 1203423). Doi: 10.1117/12.2611340

Payami Golhin, A., C. Srivastava, J. F. Tingstad, A. S. Sole, A. Strandlie, S. Grammatikos (2022) Additive manufacturing of multilayered polymer composites: Durability assessment. Proceedings of the 20th European Conference on Composite Materials – Composites Meet Sustainability (Vol 1-6). 

Kadyrova A., Pedersen M., Westland S.(2022) Effect of Elevation and Surface Roughness on Naturalness Perception of 2.5D Decor Prints. Materials, 15 (9), art. no. 3372. DOI: 10.3390/ma15093372

Abedini, F., S. Gooran (2022). Structure-Aware Color Halftoning with Adaptive Sharpness Control. In Journal of Imaging Science and Technology, pp 060404-1-060404-11, Doi: 10.2352/J.ImagingSci.Technol.2022.66.6.060404

Gooran, S., F. Abedini (2022). Three-Dimensional Adaptive Digital Halftoning. In Journal of Imaging Science and Technology, pp 060403-1-060403-12, Doi: 10.2352/J.ImagingSci.Technol.2022.66.6.060403

Payami Golhin, A., A.Sole, A. Strandlie (2022) Color appearance in rotational material jetting. The International Journal of Advanced Manufacturing Technology. Doi: 10.1007/s00170-022-10536-1

Shao, M., T. Vagg, M. Seibold, M. Doughty (2022) Towards a Low-Cost Monitor-Based Augmented Reality Training Platform for At-Home Ultrasound Skill Development. Journal of Imaging, 8(11), pp. 305. Doi: 10.3390/jimaging8110305

Shao, M., J. Clark, D. Huson and J. Hardeberg (2022) Real-time Style Transfer for Videos to Enhance the Realism of Simulation of Laparoscopic Surgeries, 2022 10th European Workshop on Visual Information Processing (EUVIP), 2022, pp. 1-6, doi: 10.1109/EUVIP53989.2022.9922706.

Kadyrova, A., M. Pedersen, S. Westland (2022) What elevation makes 2.5D prints perceptually natural? Materials 15, no. 10: 3573. Doi: 10.3390/ma15103573

Kadyrova, A., M. Pedersen, B. Ahmad, D. J. Mandal, M. Nguyen, P. H. Zimmermann, (2022) Image enhancement dataset for evaluation of image quality metrics. IS&T Int’l. Symp. on Electronic Imaging: Image Quality and System Performance,  pp 317-1 – 317-6.

Ansari-Asl, M., J. B. Thomas, J. Y. Hardeberg (2022) Camera response function assessment in multispectral HDR imaging. IS&T International Symposium on Electronic Imaging: Color Imaging: Displaying, Processing, Hardcopy, and Applications,  2022,  pp 141-1 – 141-6

Tonello, R., F. Abedini, D. Bue Pedersen, and J. Revall Frisvad (2022). Fast Impression Painting Using Multi-color Fused Deposition Modeling with a Diamond Hotend. Doi: 10.5281/zenodo.7118722

He, Ruili, K. Xiao, M. Pointer, M. Melgosa, & Y. Bressler. (2022). Optimizing Parametric Factors in CIELAB and CIEDE2000 Color-Difference Formulas for 3D-Printed Spherical Objects. Doi: 10.5281/zenodo.7064667

Abedini, F., S. Gooran, D. Nyström (2021). The Effect of Halftoning on the Appearance of 3D Printed Surfaces. 47th Annual Conference of Iarigai. 2021.

Liu, Z, K. Xiao, M. R. Pointer, Q. Liu, C. Li, R. He, X. Xie (2021) Spectral Reconstruction Using an Iteratively Reweighted Regulated Model from Two Illumination Camera Responses. Sensors, 21,7911. Doi: 10.3390/s21237911

Saha, D., L. Gevaux, T. Cances, A. Richard, G. Obein (2021). Development of a μBRDF goniospectrophotometer for BRDF measurement on tiny surfaces. Commission Internationale de l’Eclairage (CIE 2021).

Trujillo Vazquez, A., H. Fuller, S. Klein, C. Parraman (2022). The Amber Project: A Survey of Methods and Inks for the Reproduction of the Color of Translucent Objects. Applied Sciences, vol. 12, no. 2, p. 793, 2022.

Trujillo Vazquez, A., X. Aure, S. Klein, C. Parraman (2021). Recreating the Relief of the Temple of the Jaguars: Exploring Digital and Analogue 2.5D Printing of Mesoamerican Imagery. Printing for Fabrication conference 2021. Society for Imaging Science and Technology. Doi: 10.2352/ISSN.2169-4451.2021.37.41

Habib, T., P. Green, P. Nussbaum (2021). Estimation of BRDF Measurements for Printed Colour Samples. 29th Color and Imaging Conference Final Program and Proceedings, pp. 123. Society for Imaging Science and Technology. Doi: 10.2352/issn.2169-2629.2021.29.123

Trujillo Vazquez, A., D. Šarić, S. Klein, C. Parraman (2021). Influence of procedural noise on the glossiness of 2.5D printed patches. 29th Color and Imaging Conference Final Program and Proceedings, pp. 105-110(6). Society for Imaging Science and Technology. Doi: 10.2352/issn.2169-2629.2021.29.105

Saric, D., A. Kraushaar, M. Mattuschka, P Green (2021). Benchmarking modern gloss correlators with established ISO 2813 standard and visual judgment of gloss. 29th Color and Imaging Conference Final Program and Proceedings, pp. 306-310(5). Society for Imaging Science and Technology. Doi: 10.2352/issn.2169-2629.2021.29.306

Abedini, F., S. Gooran, V. Kitanovski, D. Nyström (2021). Structure-Aware Halftoning Using the Iterative Method Controlling the Dot Placement. Journal of Imaging Science and Technology 65(6): 060404-1–060404-14, 2021

Pranovich, A., S. Gooran, J. R. Frisvad, D. Nyström (2021). Optical properties and appearance of fused deposition modelling filaments. Printing in the Digital Era (IARIGAI 2021). September 2021

Liu, Zhen, Xiao, Kaida, Pointer, Michael R., He, Ruili, & Xie, Xuejun. (2021). Spectral Reconstruction Using an Iteratively Reweighted Regulated Model from Two Illumination Camera Responses. Sensors, 21(23), 7911. Doi: 10.3390/s21237911

Golhin, A. P., A. Strandlie, P. Green (2021) The Influence of Wedge Angle, Feedstock Color, and Infill Density on the Color Difference of FDM Objects. Journal of Imaging Science and Technology. Society for Imaging Science and Technology. https://doi.org/10.2352/J.ImagingSci.Technol.2021.65.5.050408

He, R., K. Xiao, M. pointer, Y. Bressler, Z. Liu, Y. Lu (2021) Development of an image-based measurement system for human facial skin colour.  Color Research and Application published by Wiley Periodicals LLC. Doi: 10.1002/col.22737

Kadyrova, A., V. Kitanovski, M. Pedersen (2021). Quality assessment of 2.5D prints using 2D image quality metrics. Applied Sciences, vol. 11, no. 16, p. 7470, 2021.

Brunton, A., L. Abu Rmaileh (2021). Displaced signed distance fields for additive manufacturing. ACM Trans. Graph., 40(4), p. Article 179.

Trujillo Vazquez, A., S. Klein, X. A. Calvet, C. Parraman (2020). Retrieving the ancient colours: artistic practice as a tool for heritage reconstruction. Society for Imaging Science and Technology. Color and Imaging Conference 2020.

Habib, T., P. Green P. Nussbaum (2020): BRDF rendering by interpolation of optimised model parameters. Society for Imaging Science and Technology. Color and Imaging Conference 2020.

Kadyrova, A., Kitanovski, V. and Pedersen, M. (2020) A study on attributes for 2.5D print quality assessment. Society for Imaging Science and Technology. Color and Imaging Conference 2020.

He, R., X. Kaida, M. Pointer, Y. Bressler, Z. Liu and Y. Lu (2021) A novel camera colour characterisation model for the colour measurement of human skin. Society for Imaging Science and TechnologyS. Electronic Imaging 2021, Color Imaging XXVI: Displaying, Processing, Hardcopy, and Applications. DOI: 10.2352/ISSN.2470-1173.2021.16.COLOR-222

Klein S., A. Trujillo Vazquez, X. A. Calvet, and C. Parraman (2020) The Reconstruction of the Appearance of the Acanceh Frieze by 2.5 Printing. Society for Imaging Science and Technology, 2020. Printing for Fabrication 2020.

Gooran, S., F. Abedini (2020): 3D Surface Structures and 3D Halftoning. Society for Imaging Science and Technology, 2020. Printing for Fabrication 2020. DOI: https://doi.org/10.2352/ISSN.2169-4451.2020.36.75

Abedini, F., S. Gooran, D. Nyström (2020) 3D Halftoning based on Iterative Method Controlling Dot Placement. Society for Imaging Science and Technology, 2020. Printing for Fabrication 2020. DOI: 10.2352/ISSN.2169-4451.2020.36.69

Habib, T., P. Green and A. Sole (2020) Implementing Directional Reflectance in a Colour Managed Workflow. Society for Imaging Science and Technology, 2020, London Imaging Meeting 2020: Future Colour Imaging, pp. 119-123(5). DOI: 10.2352/issn.2694-118X.2020.LIM-33

He, R., K. Xiao, M. Pointer and S. Westland (2020) Assessing skin tone heterogeneity under various light sources. Society for Imaging Science and Technology, 2020, London Imaging Meeting 2020: Future Colour Imaging, pp. 5-9 (5). DOI: 10.2352/issn.2694-118X.2020.LIM-15

Shao, M., C. Parraman and D. Huson; (2020) Physical Patient Simulators for Surgical Training: A Review. Society for Imaging Science and Technology, 2020, London Imaging Meeting 2020: Future Colour Imaging, pp. 124-128(5). DOI: 10.2352/issn.2694-118X.2020.LIM-05

Sole, A., G. C. Guarnera, I. Farup and P. Nussbaum (2020) Measurement and rendering of complex non-diffuse and goniochromatic packaging materials. Vis Comput (2020). https://link.springer.com/article/10.1007%2Fs00371-020-01980-9

Pranovich, A., S. Gooran, J. R. Frisvad and D. Nyström (2020) Surface Discretisation Effects on 3D Printed Surface Appearance. CEUR Workshop Proceedings, Vol-2688, CVCS2020.

Habib, T., P. Green and P. Nussbaum (2020) Spectral reproduction: drivers, use cases and workflow. Society for Imaging Science and Technology, 2020, p-.121-5

Tonello, R., A. Luongo, E. R. Eiriksson, D. B. Pedersen, A. Strandlie and J. R. Frisvad (2019) Use of greyscale voxel values in continuous DLP printing. Poster greyscale.